Disassemble Kallax: Step-by-Step Guide

The IKEA Kallax is a versatile and stylish storage solution that has become a staple in many homes. However, there may come a time when you need to move, rearrange, or simply take it apart for a change of scenery. Knowing how to take Kallax apart can save you time, effort, and potential damage to your furniture. Here's a step-by-step guide to help you disassemble your Kallax unit with ease.

Before you start, ensure you have the following tools at hand: a Phillips screwdriver, a mallet or hammer, and some packing tape. It's also a good idea to have a helper to make the process smoother and safer.

Preparing Your Kallax Unit for Disassembly

Start by removing any items stored in the Kallax unit. This includes books, decorations, and other knick-knacks. It's also a good idea to take a photo of the unit to help you remember how it was assembled and make reassembly easier.

Next, use packing tape to secure any loose shelves or drawers that might fall out during the disassembly process. This will prevent any accidents and make the process smoother.

Removing the Shelves

Begin by removing the shelves from the Kallax unit. The shelves are held in place by plastic dowels that fit into holes on the sides of the unit. To remove a shelf, tilt it slightly upwards to disengage the dowels from the holes, then pull it out gently.

If a shelf is stuck, you can use a mallet or hammer to gently tap the shelf from the top. This should help to loosen the dowels and allow you to remove the shelf. Be careful not to hit the shelf too hard, as this could damage it.

Removing the Back Panel

Once all the shelves have been removed, you can proceed to take off the back panel. The back panel is held in place by screws. Use a Phillips screwdriver to remove these screws and carefully lift the back panel off.

If the back panel is stuck, you can use a flathead screwdriver to gently pry it off. Be careful not to damage the panel or the unit itself.

Disassembling the Frame

With the back panel removed, you can now disassemble the frame of the Kallax unit. The frame is held together by screws at the top and bottom. Use a Phillips screwdriver to remove these screws.

Once the screws are removed, the frame should come apart into separate pieces. If a piece is stuck, you can use a mallet or hammer to gently tap it until it comes loose.

Removing the Legs

The legs of the Kallax unit are attached to the bottom of the frame. They are held in place by screws. Use a Phillips screwdriver to remove these screws and lift the legs off.

If a leg is stuck, you can use a mallet or hammer to gently tap it until it comes loose. Be careful not to damage the leg or the frame.

Disassembling the Drawers (if applicable)

If your Kallax unit has drawers, you'll need to disassemble them as well. Start by removing the drawer fronts. The drawer fronts are held in place by screws. Use a Phillips screwdriver to remove these screws and lift the drawer fronts off.

Next, remove the drawer boxes. The drawer boxes are held in place by slides. You'll need to remove the screws that hold the slides in place, then lift the drawer boxes out.

With all the components disassembled, you can now pack them up and move or store them as needed. When you're ready to reassemble your Kallax unit, simply follow these steps in reverse order. Happy disassembling!