How to Install a Pool Cover on an Above Ground Pool with a Deck

Safeguarding your above ground pool with a deck involves more than just installing a fence. A pool cover is an essential safety measure that also extends the life of your pool and keeps it clean. Putting a pool cover on an above ground pool with a deck requires careful planning and the right techniques. Let's dive into a step-by-step guide to help you secure your pool area effectively.

Before we begin, ensure you have the right pool cover for your above ground pool. Measure your pool's diameter and depth, and choose a cover that fits snugly. Safety covers are recommended for pools with decks as they provide a secure barrier and can support the weight of a child or pet.

Preparing Your Above Ground Pool and Deck

Before installing the pool cover, ensure your pool and deck are ready. This involves cleaning the pool, preparing the deck, and gathering necessary tools.

Start by cleaning your pool thoroughly. Remove any debris, leaves, or algae from the surface and walls. This ensures the pool cover lies flat and doesn't trap dirt underneath. Next, prepare your deck by removing any obstacles that might hinder the installation process. Clear the deck of furniture, toys, or plants.

Gather Necessary Tools

Having the right tools at hand makes the installation process smoother. You'll need the following:

• Pool cover
• Cover pump (optional, but recommended for safety covers)
• Cover cable and winch (for safety covers)
• Measuring tape
• Scissors or a sharp knife
• Pool cover clips or straps

Measuring and Preparing the Pool Cover

Measure your pool's diameter and depth to ensure the cover fits correctly. Most above ground pools have a standard diameter, but it's essential to double-check. Safety covers often come in standard sizes, but if you have a custom-sized pool, you might need to order a custom cover.

Once you've confirmed the cover's size, prepare it for installation. If it's a new cover, unfold it and let it lay flat for a few hours to allow any creases to relax. If it's an old cover, clean it thoroughly to remove any dirt or algae that might have accumulated.

Installing the Pool Cover

Now that your pool and deck are ready, and you have all the necessary tools, it's time to install the pool cover.

Start by placing the cover on the pool. If you're using a safety cover, ensure the cable end with the winch is closest to the deck. Center the cover over the pool and let it drape over the sides. For above ground pools with decks, you'll need to secure the cover to the deck to prevent it from blowing off or being pulled into the pool.

Securing the Pool Cover to the Deck

Securing the pool cover to the deck involves using either clips or straps. Clips are typically used for winter covers, while straps are used for safety covers.

For clips, attach them to the cover's perimeter and then clip them onto the deck's edge. Ensure they're evenly spaced to distribute the cover's weight evenly. For straps, attach them to the cover's perimeter and then wrap them around the deck's support beams or posts. Tighten them securely to prevent the cover from moving.

Installing a Cover Pump (Optional but Recommended)

A cover pump is a useful accessory for safety covers. It helps remove water from the cover's surface, preventing it from accumulating and adding unnecessary weight. It also helps extend the cover's lifespan by keeping it clean and dry.

Place the cover pump on the cover's surface, ensuring it's positioned correctly to drain water effectively. Most cover pumps come with a 25-foot cord, so you'll need to position it near an electrical outlet. Once positioned, turn it on and let it do its job.

Regularly inspect your pool cover to ensure it's secure and in good condition. Remove any debris that accumulates on the surface, and check the clips or straps to ensure they're still tight. By maintaining your pool cover, you're not only protecting your pool but also ensuring the safety of your family and pets.