Macrame Toilet Roll Holder Tutorial: Easy DIY Steps

Transform your bathroom into a bohemian haven with a DIY macrame toilet roll holder. This charming and functional accessory is not only a stylish addition to your space but also a great way to showcase your crafting skills. Let's dive into a step-by-step guide on how to create this beautiful piece using simple macrame techniques.

Macrame, an ancient textile craft, has seen a resurgence in popularity in recent years. With its intricate knotting patterns and earthy aesthetic, it's no wonder that this technique is loved by both beginners and seasoned crafters alike. By the end of this tutorial, you'll have a stunning macrame toilet roll holder that's perfect for adding a touch of boho chic to your bathroom.

Gather Your Materials

Before you start, ensure you have all the necessary materials on hand. This project requires minimal supplies, making it an affordable and accessible DIY.

Here's a list of materials you'll need:

• Cotton macrame cord (around 10mm in diameter) - approximately 10 meters
• Scissors
• Tape measure
• Pencil
• Ruler
• Macrame ring or wooden dowel (for the base)
• Toilet roll

Prepare Your Macrame Cord

First, you'll need to prepare your macrame cord by cutting it into equal lengths. For this project, you'll need 16 pieces of cord, each measuring 2 meters in length.

To ensure your cords are even, lay them side by side and fold them in half. Then, cut along the fold to create two equal pieces from each cord. This will give you a total of 32 pieces of cord, 16 of which will be used for the main part of the holder, and the remaining 16 will be used to create the base.

Create the Base

Begin by taking 16 pieces of cord and folding them in half. Place the folded end through the macrame ring or around the wooden dowel, pulling the loose ends through the loop to create a larkshead knot. This will secure the cords to the base.

Next, separate the cords into four groups of four. This will make it easier to work with and create a symmetrical pattern. You can secure each group with a rubber band or clip to keep them organized as you work.

Start the Macrame Knots

Now that you have your base set up, it's time to begin creating the macrame knots that will form the structure of your toilet roll holder.

For this project, you'll primarily be using two basic macrame knots: the square knot and the half hitch knot. Familiarize yourself with these knots before beginning, as they will form the foundation of your design.

Create the Square Knots

Start by taking the leftmost group of four cords and bring the first two cords over the second two cords, creating a '4' shape. Then, take the second two cords and bring them over the first two cords, pulling them tight to create a square knot.

Repeat this process with the remaining three groups of cords, working your way from left to right. Once you've completed a full round of square knots, you should have a flat, woven pattern across the base of your holder.

Add Half Hitch Knots

Now, it's time to add some half hitch knots to create depth and interest in your design. Start by taking the first group of four cords and bring the first cord under the second cord, then over the third cord, and finally under the fourth cord. Pull the cord tight to create a half hitch knot.

Repeat this process with the remaining cords in the group, working your way around the holder. Once you've completed a full round of half hitch knots, you should have a series of small loops hanging from the base of your holder.

Build the Structure

With the base and initial knots complete, it's time to start building the structure that will hold your toilet roll.

For this step, you'll be creating a series of square knots and half hitch knots to form a cylindrical shape around the toilet roll.

Create the Cylindrical Shape

Begin by creating a series of square knots, working your way up the holder. After completing a few rows of square knots, switch to half hitch knots to create a more rounded shape. Alternate between square knots and half hitch knots, gradually working your way up the holder.

As you work, ensure that you're keeping the tension even and that the cords are lying flat against one another. This will help create a smooth, uniform surface for your toilet roll to rest on.

Create the Top Edge

Once you've reached the desired height for your holder, it's time to create the top edge. For this, you'll be using a series of half hitch knots to create a neat, finished edge.

Start by taking the first group of four cords and create a half hitch knot as described earlier. Continue this process with the remaining groups of cords, working your way around the holder.

Once you've completed the top edge, trim any excess cord to create a clean, even finish.

Finish the Holder

With the main structure of your macrame toilet roll holder complete, it's time to add the final touches and prepare it for use.

First, take the remaining 16 pieces of cord and create a larkshead knot around the top edge of the holder. This will create a loop that you can use to hang your holder from the toilet roll holder bracket.

Finally, gently pull the cords at the base of the holder to cinch it closed, creating a snug fit for your toilet roll. Your beautiful macrame toilet roll holder is now ready to be admired and used!

Display your new macrame toilet roll holder with pride, knowing that you've created a functional and stylish piece that adds a touch of boho charm to your bathroom. Happy crafting!